Book

A Call

Call Now

888-409-2739

Questions?

Contact Us

A roofing supplement is a documented request asking the insurance carrier to pay for roof work the adjuster’s first estimate left out. It covers line items the job actually requires: code-required items, manufacturer-required items, and damage nobody could see until the old roof came off.

Supplements aren’t about padding a claim. Adjusters write the first estimate fast, often from the ground or a short roof inspection, and they make mistakes. Nobody can see what tear-off reveals. A supplement closes the gap between what the estimate pays for and what the job requires.

Why the first estimate comes up short

The usual reasons:

Line items that commonly get missed

Item Why it gets missed
Drip edge Often required by code but left off the first scope
Ice and water shield Code-required in many areas at eaves and valleys, and the adjuster can’t see what was there before because tear-off hasn’t started
Starter strip Manufacturer-required, and a separate line item from field shingles
Ridge cap Separate line item from field shingles
Step, counter, headwall and chimney flashing Damage often only visible up close or after tear-off
Valley metal Missed on quick inspections
Decking / sheathing Decking that may not be code compliant only shows up during tear-off
Steep and high-roof charges Pitch and height get underestimated from the ground
Gutters and gutter guards Left off when the adjuster scopes the roof only
Permits and code upgrades Vary by city and county

What a strong supplement includes

  1. The adjuster’s original estimate, reviewed line by line.
  2. A supplement written in Xactimate (or Symbility, if that’s what the carrier uses), so it matches how the carrier prices claims.
  3. Code references for every code-required item, using the code your city or county has adopted.
  4. Manufacturer installation requirements for items the warranty depends on.
  5. Photos. The most useful are taken before the build and during tear-off. Photograph decking, flashing, layers and anything you’ll ask for.
  6. Measurements from a report (Roofr, EagleView and similar) so quantities aren’t in dispute.

How the supplement process works, step by step

  1. Check the file on day one. Make sure you have the estimate, measurements and photos before anything else.
  2. Confirm the right adjuster. Adjusters get reassigned constantly. Sending a supplement to the wrong person can stall a claim for weeks.
  3. Review the estimate against the job. Compare every line to the measurements, the photos and local code.
  4. Write the supplement with documentation attached to each item.
  5. Have a second person review it for pricing, quantities and missing documentation before it goes out.
  6. Submit it to the carrier.
  7. Follow up consistently. This is where most supplements stall. Calls and emails multiple times a week until the adjuster responds.
  8. Escalate when an adjuster goes quiet, through the carrier’s main line.
  9. Rebut denials when the evidence supports it. Partial approvals and denials are normal. When code or documentation supports an item, answer the denial with that documentation.
  10. Check the revised estimate. Make sure every approved item made it onto it, with the right quantities.
  11. Get the depreciation released. Approved isn’t the same as paid. Send the certificate of completion and follow up until recoverable depreciation is released.

Why supplements stall (and how to avoid it)

How Apex Handles This

Apex Estimators is the supplement department for roofing contractors. Our two owners were field adjusters for more than 20 years combined.

  1. Send us the claim. The adjuster’s estimate, measurements and photos. That’s your whole part.
  2. We write the supplement. Every line item backed by code, manufacturer requirements and/or photos, with a second review before it goes out.
  3. We work the adjuster. Four times a week, two calls and two emails, until the depreciation is released.
  4. You get paid. You watch every step on your claims board.

12% of the additional money we get approved, invoiced after the depreciation is released. The $150 minimum is waived on your first 10 claims.

How our supplements workBook a Call

Frequently Asked Questions

What is a supplement in roofing?

A documented request asking the insurance carrier to pay for roof work the adjuster’s first estimate left out, such as code-required items, manufacturer-required items and hidden damage found during tear-off.

Is supplementing a roof claim legal?

Yes. A contractor documenting and submitting the scope of the work they’re doing is standard practice. See our FAQ

How long does a roof supplement take?

It depends on the carrier and the adjuster. At Apex, the average is 14 to 17 days from claim received to supplement approved.

What photos do I need for a roof supplement?

We’ll work with whatever you have. If you don’t have many photos, or any, that’s okay: we work with many roofers who just want us to process the claim. But if you want the most out of your supplements, we strongly encourage good pre-build and tear-off photos: decking, flashing, layers, valleys, penetrations, and anything you’ll ask the carrier to pay for. Grab our free photo guides, and once you’re a client we’re happy to answer any questions you have.